| Content: |
| |
| Address questions regarding Assignment #26. |
| |
| Present general discussions regarding internal forces (axial, shear and moment) in |
| structural members as outlined in R/S Chapter 8 (pp. 403-429). |
| |
| Present concept of solving for internal forces using COLM and COAM as demonstrated |
| in Worked Problem Set #27. |
| Skills/Objectives: |
| |
| Calculation of internal forces in structural members using COLM and COAM. |
| Assessment: |
| |
| Homework Set #27: Work problems 8-15, 16, 19, 24, 27 and 30 (due on Day 28). |
| Resources: |
| |
| Glover Chapter 6 (pp. ), Glover Chapter 5 (pp. 105-124), Reference #4, |
| R/S Chapter 8 (pp. 403-429). |
| Notes: |
| |
| Information presented in R/S Chapter 8 is germane to the solution of these problems; |
| however, the solutions are to be developed with COLM tables as shown in Worked |
| Problem Set #27 - not with the procedures presented in R/S. |
| |
| The solution to each problem MUST include a units table, all necessary system diagrams, |
| all necessary conservation tables, and then the solution. |
| |
| Information presented in R/S Chapter 7 is germane to the solution of these problems; |
| however, the solutions are to be developed with COLM tables as shown in Worked |
| Problem Set #26 - not with the procedures presented in R/S. |
| Advanced Organizers: |
| |
| Review All previous material. |
